Features: Use in most hotends 1000°c working temperature High thermal conductivity - 30+ W/mK Water based - no VOCs Improves efficiency of your hotend Increases heat dissipation from the heater cartridge and heat break Increasesheat transfer to the thermistor and nozzle Helps with heater cartridge removal from the heater block Not electrically conductive, no risk of shorting Made in the USA
Directions:
Cartridges (thermistor & heater): Coat the cartridge and hole in your 3D printer heater block. Insert the cartridge while the paste is still wet. Let the paste dry before heating up your hotend.
Nozzles: Only use a small amount on the threads of the nozzle (do not apply the BN paste to the threads of the heater block), install the nozzle while the paste is wet and let dry before heating.
Heat Break: Coat the exterior of the heat break with BN paste, install into the heatsink while the paste is wet and let dry before heating.
