In stock, quantities limited.

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials.

ALERT : Avoid Cold Bondtech CHT Nozzles Change

Heat up the heat block up to 280C, or at least above 250C, before removing or tightening any Bondtech CHT nozzle. Use at most 1.0 Nm torque.

They are manufactured by Bondtech in-house, and will fit the following hotends/blocks:

• E3D Volcano blocks
• Other Volcano type blocks
• Artillery Sidewinder X1 and X2
• Anycubic Vyper
• FLSUN Super Racer
• Artillery Genius Pro
• Anycubic Kobra and Kobra Max
• Lulzbot TAZ MOARstruder

Main Advantages

• Copper body
• Hardened Vanadium Steel inserts
• Nickel coating
• Higher melt capacity
• Affordable price
• Machined with ultra-precision
• Brass nozzle with Nickel coated surface
• Optimized for 1.75mm, compatible with 2.85/3.0mm filament 

ALERT : Size limitation for fiber loaded filaments

For Carbon or Glass fiber loaded abrasive filaments use only 0.6, 0.8 and 1.0mm nozzle size.

ALERT : For particle loaded filaments

For metal, wood, glitter or other particle loaded abrasive filaments you may use the 0.4mm nozzle size.

Advantages of the Bondtech CHT™ technology:

Bondtech CHT™ nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.

Advantages of the Nickel Coating

A nickel coating is applied to the coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel-coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle’s surface.