Bondtech LGX™ Large Gears eXtruder

$99.99

In stock, ready to ship.

The Bondtech LGX™ Large Gears eXtruder is the first of Bondtech's filament feeders to use its new Dual Drive Technology based on larger drive gears. NOTE: This extruder only supports 1.75 mm size filament.

Bondtech eXtruder features:

Larger drive wheels, for increased filament grip
Filament pre-tension lever, for repeated results
Multi-function interface socket, for tool or application quick swap
Drive wheels’ maintenance windows, for easy cleaning
Compact, light and symmetric design, for increased performance and compatibility
Multiple mounting hole patterns, for easy and flexible setup
A small step for a greener Future, craft boxes without bleaching and no coating

You can read more about the new

LGX™ features by clicking here. Additional product info is below.

Next Previous

What's in the box:

1x LGX™ feeder
1x Custom LDO Nema17 25mm pancake stepper motor
1x Bowden Interface Plug (with threaded metal push-fit)
1x Direct Drive Interface Plug (for Slice Engineering hotends)
1x 2mm Hex Key (recommended tool)
1x Product Line Information Brochure
1x Powered by Bondtech sticker
3x M3x30 mm Low Head screws;
4x M3x18 mm Stud with 5 Hex with M3x4 thread;
30mm PTFE tube to use in the Direct Drive Interface Plug.

About LGX™ Extruder

e-steps value : 400 on 16 bit micro-stepping setups; 800 on 32 bit micro-stepping setups
Drive wheels : hardened steel
Materials compatibility : abrasive; rigid; semi-flexible; flexible; and soft
Mounting holes : M3
Mounting patterns : bottom anterior (2 points); left (2 points), right (2 points), front (4 points), back (4 points)
Holes on the sides of the LGX™ : 5 mm depth
Holes on the bottom of the LGX™ : 12 mm depth
Retraction speed : 35 mm/s
Retraction distance (bowden) : ~5 mm (0.4 + tube length x 0.15)
Retraction distance (direct drive) for rigid materials : 0.4 mm
Retraction distance (direct drive) for soft materials : 3 mm
Max operating temperature : 80°C
LGX™ DD net weight : 218.6 g
LGX™ B net weight : 224 g
Package measurements : 80x103x73 mm
Package weight : 269 g
Download the LGX Technical Drawings here
USING A PLATE BETWEEN THE EXTRUDER AND THE STEPPER MOTOR
- Max thickness : 2.6 mm
- Optimal Thickness : between 0.3 and 2.3 mm;
Optimal Thickness allows full teeth engagement between the motor gear and the main double gear.

LDO Stepper Motor for Bondtech LGX™

PH-06AWJ connector
2 phases
DC 5.5 V
Max 1.0A/phase
Download the stepper motor Technical Data Sheet here

STEP Files To Download

Click the links below to download STEP files with simplified geometries of each available setup.

Product video

LGX™ Webinar

Bondtech LGX™ Large Gears eXtruder

USING A PLATE BETWEEN THE EXTRUDER AND THE STEPPER MOTOR

You may also like