$14.99
In stock, ready to ship. Specifically designed for changing Bondtech BiMetal nozzles 0.8 Nm torque...
$114.99
In stock, ready to ship. Prusa i3 MK3S / MK2.5S Mosquito A lightweight high-resolution extruder...
$1.99
In stock, ready to ship. Push-fit ECAS 4mm is a Bondtech Spare Part to...
$154.99
1.75mm in stock, ready to ship. 2.85mm has a 1-2 week lead time. The Bondtech...
$3.99
In stock, ready to ship. Hardened and precision ground shaft for the Bondtech gearkits.Diameter: 4.00...
$6.99
In stock, ready to ship. Comes with the updated Shaft/Gear assembly, as of 2/22/23. Replacement Shaft...
$2.99
In stock, ready to ship. Thumbscrew assembly.
$6.49
In stock, ready to ship. Boron Nitride Thermal Paste (BN Paste) Thermal paste...
$2.99
Price is per single coupling. All items in stock. All types of couplings and adaptors...
$4.97
Updated 11/18/24.
$0.49
In stock, ready to ship.As used on the Revo CR, but also usable on other...
$2.99
In stock, ready to ship. Replacement cable for E3D's premium/high precision heater cartridges, 1 meter...
$1.99
In stock, ready to ship. Replacement cables for the LDO Smart Orbiter v3.0.
$11.99
In stock, ready to ship. Price is per meter. If multiple meters are ordered, will...
$1.99
In stock, ready to ship. Conventional relay, not solid state. 24v coil, contacts rated for...
$2.00
DC barrel jack, 2.1mm pin, to screw terminals or a female/female gender changer.
$0.49
From Left to Right: "1.75 Mini MK8":5mm ID9mm OD11mm Overall Length "3mm":5mm ID12.5mm OD11mm Overall...
$15.00
Board only, no accessories. These are boards that are used, some of them internally (by...
$5.00
Brand new, never used, early prototype but never progressed. Used for mounting an E3D Roto...
$0.25
Brand new, as-is, no warranty. Generic brand heater cartridge, standard 6mm diameter, 20mm long. 1...
$0.99
Brand new. 100K ohm NTC 3950 Wiring length: 1 meter
$0.01
Can't even remember why I bought these! Brand new, never used.
$40.00
– Sold OutPump/res w/ fittings for 8mm ID tubing, 60mm heatercore, and mounting hardware.
$0.99
Bore Diameter: 8mm Bearing Type: 608RS Overall Size: 48 x 27 x 11.5mm Mounting Hole...
$21.99
In stock, ready to ship. This motor is lighter and shorter than a typical NEMA17...
$29.99
– Sold OutThis is a belt tension meter to assist in properly tensioning belts on your 3D...
$109.99
In stock, ready to ship. We are proud to be aUS distributor for E3D. 24v...
$15.99
In stock, ready to ship. Integrated Drive Gear Assembly compatible with: Bondtech DDX for Creality...
$14.99
In stock, ready to ship. Genuine Delta fan, from authorized distributor. Voltage - Rated24VDCSize /...
$59.99
In stock, ready to ship. Available in 1.75 mm only. Does not include heatsink, is...
$14.99
In stock, ready to ship. Connects to the 10 pin temperature sensor header, 500mm cable....
$20.00
– Sold OutIn stock and ready to ship. These Double Shear Stepper Mounts from Mandala Rose Works are a...
$184.99
Lead time: 1 week. Shipping version: v1.05. Documentation can be found here. Features: The Duet 2 Ethernet...
$169.99
In stock, ready to ship. Internal antenna has been discontinued in favor of external antenna. Documentation...
$36.99
In stock, ready to ship. Documentation can be found here. The Duet 3 ADC daughterboard provides...
$88.99
In stock, ready to ship. Documentation can be found here. The Duet 3 Expansion 1HCL is a...
$54.99
In stock, ready to ship. Documentation can be found here. Shipping v1.1. The Duet 3 Expansion 1XD is...
$154.99
In stock, ready to ship. Documentation can be found here. The Duet 3 Expansion board is a...
$27.99
In stock, ready to ship. Documentation can be found here. The Duet 3 Expansion Mini 2+ is...
$269.99
In stock, ready to ship. Comes with connector kit and Raspberry Pi cable. Documentation can be found here....
$204.99
In stock, ready to ship. Documentation can be found here. The Duet 3 Mainboard 6XD...
$139.99
In stock, ready to ship. Documentation can be found here. The Duet 3 Mini 5+ is...
$86.99
In stock, ready to ship. The board allows you to connect: The extruder motor A...
$48.99
In stock, ready to ship. The Duet 3 Scanning Z probe is a CAN-FD connected...
$2.99
In stock, ready to ship. Duet 3 to Raspberry Pi ribbon cable, as bundled with...
$24.99
In stock, ready to ship. Documentation can be found here. This board allows for the connection of...
$54.99
In stock, ready to ship. Documentation can be found here. Currently shipping v1.2a/v1.3, with onboard accelerometer. v1.2...
